scuffing

Dessa är ordets examples relaterade till scuffing. Klicka på valfritt ord för att gå till dess ords detaljsida. Eller, gå till definitionen av scuffing.

Exempel på scuffing

  • Compared to the mesh screen grader the expanding roller sorter is gentler on the potato, causing less bruising and scuffing.

  • In addition, to reduce scuffing further, the conical rollers could be manufactured from a less abrasive material such as polyvinyl chloride.

  • To avoid foot scuffing, wood blocks were set on a board 2 m long, and the prototype walked on the blocks.

  • It was observed that the level of scuffing with the new system was higher than that for the expanding roller sorter.

  • Foot scuffing at mid stance is ignored so that the swing leg can swing from the rear to the front.

  • Due to the oversimplification of the kneeless model, foot scuffing occurs at mid stance and will be neglected in the simulation.

  • That finish is prone to damage by scuffing and abrasion.

  • There is nothing more demoralising than children walking about scuffing paper in the corridors, yard, playgrounds or sports fields.

  • Television cameras pictured him scraping his boots on the pitch scuffing the surface when play was held up after a gas canister exploded.

  • Rolling very slowly, step over the bars with scuffing foot and rest it on the front tire.

  • Wear areas under swings and at the base of slides are particularly prone to scuffing out.

  • Plating the piston skirts was necessary to put a hard iron skirt surface opposite the silicon of the block to prevent scuffing.

  • The thin coating reduces moving friction and reduces cylinder wall scuffing.

  • Consequent overheating distorted the open deck block, allowing antifreeze to seep past the head gasket, which caused piston scuffing inside the cylinders.

  • Because pressure gates move slightly during use, long-term wall scuffing and denting can occur.

Betydelse av scuffing

Browse By Letter

NYA ORD

European

May 10, 2021

Läs mer

DAGENS ORD

Shimmer

May 10, 2021

Läs mer