Exempel på reamer

• Reamers, drills and other engineering tools are used for a variety of purposes and their sale is not restricted.

• Most reamer manufacturers will, however, produce reamers to customer specifications.

• The reamer slowly cuts away material, leaving a chamber capable of accepting a specific cartridge.

• Chamber reamers come in two general types - solid pilot reamers and floating pilot reamers.

• Given proper care, a reamer can cut 10-15 chambers between sharpening.

• These reamers increase the width of the ice channel and reduce friction between the hull and ice.

• The hole is then prepared to a precise diameter with a reamer.

• After verifying the correct anatomic eyelet pin placement, a 7-mm reamer is used over the pin to drill a tunnel depth of 25 mm.

• The assembly can consist of drill collars, subs such as stabilizers, reamers, shocks, hole-openers, and the bit sub and bit.

• When a cutting tool such as a drill bit or reamer is used, the feed is done with this leadscrew.

• Chamber reamers are typically made of high speed steel and require lubrication during the cutting operation.

• Chamber reamers are designed with flutes to collect and extract the cut material, however these flutes must be periodically cleaned (typically after every.2 of cutting).

• Automatic or manual reamers can be used to correct this problem.

• Since the 6.5-08 was a wildcat cartridge, there were variations between cartridge chambers depending on the reamer used to cut the chamber.

• There are also non-precision reamers which are used for more basic enlargement of holes or for removing burrs.