Príklady aluminum

• A stepped aluminum layer was then deposited on the rear side.

• The high-pressure chamber is separated from the remainder of the shock tube by an aluminum membrane.

• All vessels transported from the field were covered with aluminum foil and placed into a sealed plastic bag to prevent contamination.

• However, the main body of the shock compressed aluminum is completely uniform.

• Both arrays consisted of 16 aluminum wires of 15-mm diameter.

• It has been decided to use commercial aluminum alloy for manufacturing the links since it is low-cost and lightweight.

• A part and two sets of jaws were machined from aluminum stock.

• The construction process so far has used an aluminum mandrel for coating either thin multi-layers or mixtures, and then mandrel removal by an aqueous solution.

• The arm construction we considered consists of rectangular aluminum beams of l (m) length each.

• The pictures also show that the shock velocity inside the aluminum target, and hence the pressure generated in aluminum, increases.

• The animal was restrained in a loose-fitting canvas bag and the head fixed to a plexiglass frame using the aluminum crown.

• The insulation times of aluminum and tungsten wires are proportional to the length.

• The other ends of the fiber optics were fixed in aluminum tubes, attached to a plastic plate on the outside of the tank.

• Clean aphids were placed in pre-weighed aluminum dishes dried, and weighed.

• Extreme pressures in aluminum were generated with the use of underground nuclear explosions.