Voorbeelden van thermoplastic

• Thermoplastic cradles must tie up to patient bony pelvis anatomy, yet lateral tattoos are tied in with alignment marks drawn on the cradles.

• The domain selected for experimentation was the conceptual design of thermoplastic components.

• Epoxies, which are thermoset polymers, do not melt when heated (as opposed to thermoplastics).

• Based on clinical experience, this author notes that anteriorly encasing thermoplastic cradles pose additional technical problems.

• Within a few days, a thermoplastic shell was moulded using standard pre-cut material and the simulation session repeated.

• Repositioning accuracy of a commercially available thermoplastic mask system.

• Two types of vacuum-formed shells, and eight thermoplastic systems have been evaluated.

• However, some patients may have more movement than others such that conventional immobilisation with thermoplastic shells may be inadequate.

• The demonstration showed the synthesis and exploration of a thermoplastic component life solution.

• All of the shells and masks were made by the same mould room staff team, who have several years of experience using both thermoplastic and plaster-cast methods.

• This shows how the life-cycle knowledge about sink mark defect formed due to protruding thermoplastic snap-fit, can motivate a designer to explore using an alternative assembly feature.

• The thermoplastic shell was shown to be inadequate in its initial format and this was thought to be due to insufficient inferior location points for the shell.

• However, helmets made from thermoplastic materials such as these are liable to deteriorate in strength if painted or treated with solvents.

• The many thermoplastic materials originated mainly in the post-war period.

• These cover such diverse possibilities as uses to replace synthetic fibres and inclusion in the manufacture of thermoplastics.