Dit zijn woorden examples gerelateerd aan ammeter. Klik op een woord om naar de detailpagina van het woord te gaan. Of, ga naar de definitie van ammeter.
Each horizontal row comprises the ammeter belonging to feeders which are supplied through a given group switch.
The panel which carries the standard instruments also carries ammeters used to measure current to auxiliary circuits in the power house.
The scale may be completed by marking the positions of the pointer when other currents of known strength flow through the ammeter.
They were all up to capacity, save the ammeter from the coils.
A moving coil permanent magnet ammeter provides the basis for this.
Todays average clamp-on ammeter is not accurate enough at such a small scale.
The current is amplified and displayed on an ammeter.
Measuring instruments such as ammeters and voltmeters need to be checked periodically against known standards.
It started with electronics testing equipment such as power meters and ohmmeters, and followed later by ammeters.
This type of meter responds to both direct and alternating currents (as opposed to the moving-coil ammeter, which works on direct current only).
Zero-center ammeters are also commonly placed in series with a battery.
The plant opened in 1941, and employed up to 279 people making ammeters, gauges, and instrument clusters.
The ammeter is used in series with the load.
On heavy trains close monitoring of the ammeters was necessary to avoid motor damage.
Auxiliary gauges were restyled and the ammeter was replaced with a voltmeter.
The instrument panel had a speedometer, fuel gauge, temperature gauge, ammeter and a comprehensive cluster of warning lights arranged in a pie chart formation.
Additionally, the instrument cluster was slightly revised; the ammeter was replaced by a voltmeter while maintaining the 3-pod arrangement of the speedometer and gauges.
The instruments (speedometer, fuel gauge and ammeter) were placed in a cluster around the steering column and the gear change was floor mounted.
A voltmeter or ammeter is attached to the sample, and a heat source, such as a soldering iron, is placed on one of the leads.
