Dette er ordets examples relatert til machine-tool. Klikk på et hvilket som helst ord for å gå til ordets detaljside. Eller, gå til definisjonen av machine-tool.
The test shows that the machine tool has a good contouring performance.
Figure 5 shows an example of a machine tool representation.
This makes prediction of the instants of direction reversal in machine tool feed drives easier.
The matcher compares the matched par t faces with the motion capabilities of the machine tool effectors.
But pre-processed paths limit the integration of sensor information into machine tool control.
The dynamic and control performances of the hybrid machine tool are to be tested.
It has been shown that the machine tool workspace and global stiffness can be improved by properly adjusting the geometric configuration.
Some relationships between the reachable workspace and the dimensional parameters of the parallel machine tool have been obtained with graphical representation.
Figure 4 shows the driving forces that are computed from the dynamic model when the machine tool moves along the linear trajectory.
Figure 11 shows the matches for the machine tool in this example.
To assess the performance of the machine tool, the contouring performances of the machine along circular and straight-line paths are evaluated.
The possible applications of this robot include a wrist mechanism, an orientating device for a machine tool bed, a surgical force-feedback, and others.
Note that this 5-axis machine tool would probably be sold with a feedrate capability advertised as 200 mm/s.
In general, a columned reachable workspace is required for a parallel kinematic machine tool for its special configuration arrangement.
The machine tool is described by the degrees of motion freedom it has.
