Examples of drive shaft

• Long horizontal pistons groaned and pushed the tie rods of the drive shaft. 

• A 96 tooth steel gear, with a pitch diameter of 3in., was mounted on the drive shaft just above the clutch.

• They are engine fully dressed, body panels, wiring harness, braking system, drive shaft and steering suspension.

• Each turbine was connected to the drive shaft through a different gear train.

• Inboard brakes are fitted to a driven axle of the car, as they require a drive shaft to link the wheel to the brake.

• It was significant at that time because it used a friction clutch, and also had a drive shaft to power the wheels.

• On many shaft-drive motorcycles the drive shaft is contained in one of the long sides of the swingarm.

• All three members of the class have a drive shaft with angled axle drive.

• The second is that the input drive shaft goes essentially straight through the differential housing, allowing simple coupling to a second set of swing axles.

• The boat has both hybrid and diesel power working on the same drive shaft.

• This system was necessary due to the way the engine sat on a platform above the drive shaft.

• Instead, it incorporated a belt that ran from the flywheel to the drive shaft to turn the three-speed transmission.

• Suspension lifts also impact other factors, such as drive shaft length, steering geometry and brake lines.

• This keeps drive shaft angles equal on both sides and helps prevent steering irregularities and vibration.

• In some cases a longer drive shaft is used on one side.

• There is also a blacksmith shop and two forges in the building, both of which are powered by the drive shaft.