Това са думите examples, свързани с static-equilibrium. Щракнете върху която и да е дума, за да отидете на страницата с подробности за думата. Или, отидете на дефиницията на static-equilibrium.
Kara contains a reference to the body that is in static equilibrium and a list of the forces that keep that body in equilibrium.
Grasp configurations are achieved so that a static equilibrium exists between the grasping forces by the fingers on the object.
Martin2 investigated the feasibility of solving contact case problems by using the static equilibrium conditions (round peg inside the hole with two point contacts).
Hence, the number of equations in equation (5) must be reduced, yet maintain the full representation of the manipulator's static equilibrium requirement.
S 1- is the static equilibrium pressure.
Social costs, such as environmental or labour costs, are not considered to be within the realm of economic analysis, since these are considered external to a fictional static equilibrium.
We have derived the geometric conditions for obtaining each contact-state, and have applied static equilibrium to obtain the force/moment conditions for maintaining these contact-states.
The method starts by considering an initial static equilibrium state for the structure under study, and a small incompressible perturbation with the same symmetry.
This procedure is not applicable for the velocity perturbations, since we suppose a static equilibrium.
In a second phase, the angular error is corrected, then in a third phase the forces / moments are close to the static equilibrium forces distribution.
An important feature of the problem is that in static equilibrium the density remains undetermined and can be prescribed arbitrarily.
This is the case of the tokamak in static equilibrium.
The chaotic attractor collides with the unstable fixed point (encircled by a small loop located to the lower left of the static equilibrium).
With the static equilibrium equations, the relationship between forces and moments for maintaining each contact state is derived.
Because a quasi-static process is assumed, each of the contact states is analyzed from static equilibrium conditions.
