Примери за burr

• They survive as a steady current in the idiom (a political commentator referred recently to 'a couple of burrs under the economic saddle').

• Largeerrors can be generated if the hole has burrs, rounded edges or other imperfections, but even when the hole is near-perfect a residual error remains.

• Under the microscope, he saw how tiny hooks on the ends of the burrs caught in loops in the wool.

• The burrs were then reduced by hand polishing to 0.0001, 0.0004 and 0.0009 in. height, respectively, and the procedure repeated.

• The test section was then split, and the appropriate drill shank inserted into each hole from the inside wall position to remove the internal burrs.

• The fallen burrs entangled a number of hoppers, and many were impaled by burrs still attached to the grass ; the impalement of hoppers usually occurred during the periods of ecdysis.

• In case that the burr is not removed completely, the uncut depth is incorporated into the desired trajectory for compensation.

• With death having silenced his rebuking voice, there was little to remind people what a burr in their sides he had been.

• If the specified burr height is low, an additional shaving operation is required to shave away the excessive burr height produced by the piercing operation.

• The direction of the piercing operation will be same as the burr-side the burr-side is the additional design specification input by the user during the feature-modelling phase!.

• In that case a lathe setter was removing burring in the central hole of a petrol filler cap which he was manufacturing.

• Such occasional difficulty as may be experienced is probably due to absolutely new coins with slight burrs which wear off after a very little use.

• Burrs are a rotary analog to files that cut linearly (hence their alternate name, rotary files).

• Burrs are produced on the side of the workpiece that is against the die.

• Honing and visual inspection were repeated until all the holes appeared t o be free from burrs.