Примери за anodizing

• The color that results on a titanium ring depends on the thickness of the oxide coating, which is determined by the anodizing voltage.

• Anodizing the foil creates pores in the foil a micrometer deep and 60 nanometers wide.

• The source material can be equipped before structuring with a high-quality surface finish, such as painting, anodizing and marking.

• The process is called "anodizing" because the part to be treated forms the anode electrode of an electrical circuit.

• Although anodizing only has moderate wear resistance, the deeper pores can better retain a lubricating film than a smooth surface would.

• Painting, anodizing or plating metals are good ways to prevent their corrosion.

• The anodizing current varies with the area of aluminium being anodized, and typically ranges from 30 to 300 amperes/meter (2.8 to 28 ampere/ft).

• Sulfuric acid soon became and remains the most common anodizing electrolyte.

• Integral color anodizing is generally done with organic acids, but the same effect has been produced in laboratory with very dilute sulfuric acid.

• The company improved double anodizing, which for the first time allowed high-volume packaging to be fully anodized in addition to having a desired decorative finish.

• The newest innovation is anodizing of the aluminum coil stock for use in architectural details and standing seam panels.

• Integral color anodizing was originally performed with oxalic acid, but sulfonated aromatic compounds containing oxygen, particularly sulfosalicylic acid, have been more common since the 1960s.

• So anodizing will increase the part dimensions on each surface by half the oxide thickness.

• It is also used for integral colour anodizing.

• The process to create nanopillars starts with anodizing a 2.5 mm thick aluminum foil mold.